TOLEDO 18098 Swim Spa 428x222x145cm

Description

TOLEDO 18098 SPA pool with hydro massage  428x222x145cm

Size: 4280x2220x1350/1450mm

Fully insulated housing

Steps: yes (in housing colour)

Number of seats: 3 people

Power supply: 380V/50Hz

Coating: USA acrylic

Stainless steel construction: yes

POOL AND SPA:

Headrests: 2 pcs

Number of pumps: 6 pcs in total

Total power: approx. 13.5 kW in total

Water jets: 43 pcs.

2HP/1.50kW water pump: 1 pc.

Counterflow nozzles 9.5″: 3 JETs

Swimming pump 3HP/2.25kW: 3 pcs.

1HP/0.75kW circulation pump: 1 pc.

Air jets (1.5 “): 12 pcs

Air pump 0.7kW: 1 pc

Aeration valves: 3 pcs Easy-Flow Air Venturi 

Fibre optic lights: 78pcs (7 kinds of colours)

SPA light: 3pcs (7 kinds of colours)

Drain valve: yes

Suction valve: yes

Inlet valve: yes

Cartridge filter: 1 pc

Ozone generator: yes

BALBOA TP-600 or VL801D control panel

3kW BALBOA heater: 1 pc.

—————————————————

All pool basins are made of high-quality American acrylic, resistant to weather conditions and UV rays. The construction of the pools is made of chrome-nickel stainless steel. The basins and housings are available in many colors. The customer can individually order the colors. The controllers carry out daily filtration and maintain the set temperature. The equipment includes cartridge filters and an ozone generator for water disinfection. It is also possible to install a UV lamp and a sand filter.

The pools are adapted for use both inside and outside, in summer and winter. Thanks to the thermal coating and full insulation of the bottom of the basin and the casing, the water’s heat is kept at the same level for a longer time. Also, electricity costs are minimized. Illuminated handrails or water poles add color to the entire device.

y is a convenient, efficient, and reliable possibility to adjust a smooth and even running speed.
Fluid drive – the underwater treadmill is mechanically driven. The drive of the device is devoid of electrical components, which guarantees the safety of treadmill users.

The BALBOA panel supports all functions in the bathtub and the pool, starting the pumps, ozone system, lighting, and ending with the heater. It is a company from the USA that produces the highest quality parts for SPA bathtubs, including a completely failure-free and vandal-proof controller. The controller has two independent water heating modes, which means that you can easily manipulate the water temperature depending on your needs. After programming the appropriate filtration cycle, it starts the circulation pump, which passes water through the filters and disinfects it.

Our bathtubs and swimming pools are equipped with a 3000 W instantaneous water heater. Thanks to it, you can raise the temperature of the water and keep it at a constant high level. The heater is an indispensable device when using the SPA.
The jets in the bathtub and the pool are chrome-plated. You do not have to worry that these jets will become covered with limescale. Each water jet has an aeration function, which consists of adding air to the water system, which increases the strength of the water massage.

The jets found in SPA tubs are rotating, directional, and point-like.
The complete insulation of SPA bathtubs is made of polyurethane foam, the entire basin of the bathtub is covered with a thickness of about 15mm to 30mm, the casing and the bottom are about 10mm to 15mm, this prevents heat loss, thanks to which the power consumption of the heater is limited.

The housing is made of high-quality, weather-resistant plastic. Sunlight does not discolor the color of the housing.

The bottom is made of polymer and has been completely cast. The bottom, casing, and full insulation create something like a thermos flask. Heat transfer lasts a very long time, which results in low electricity consumption.

Insulation standards for outdoor bathtubs:

• The polyurethane foam basin insulation has a thickness of about 15 to 30 mm.

• The casing frame is made of wood, and the casing itself is made of high-quality plastic (30mm insulation thickness on the casing elements). The entire housing with the bottom is insulated with polyurethane foam with a thickness of about 10-15 mm.

Pumps and heater give heat to the bathtub and reduce the amount of heat given off by the basin, which reduces electricity consumption.

Insulating the bottom of the bathtub with polyurethane foam is more efficient and gives less heat to the atmosphere than foam with a thermal insulation foil available from competitors. Foam with a thermal insulation foil will not fill all the gaps, as in the case of polyurethane foam, which will tightly fill every free space, thanks to which the heat of the water does not escape from the basin.
Two ball valves are installed next to the circulating pump and the heater, which in case of failure of a given part, can be turned off and replaced without the need to drain the water from the bathtub. Manifolds and pumps have additional pipes that are connected to the drain. When draining the water from the tub, the water comes down from all lines by gravity and pumps without having to blow out and disassemble the pumps.
We offer fiber optic bundles and underwater lighting in 7 different colors in our tubs and pools. In terms of quality, optical fibers are definitely better than LED light. They are completely failure-free and shine with brighter light. These lights are the perfect solution for an amazing experience and create the right atmosphere while bathing. Our lighting changes colors smoothly, or it is possible to retain any color, giving even more pleasure from hydro-massage and swimming.

Color types: red, blue, yellow, green, orange, purple, and white.

Color therapy is an unconventional treatment method that exposes the sense of sight of a given person to the appropriate colors that soothe, relax or stimulate. When different colors surround you, you can have more energy and optimism.
The ozone generator is a special program that sterilizes the water so that both the bathtub/swimming pool and the water will be clean. It is a new and fast way to remove bacteria, algae, etc., the water does not need to be changed even up to 6 months.

It is possible to install a UV lamp for water treatment in SPA bathtubs and swimming pools. As sterilizers, they remove harmful substances from the liquid and eliminate viruses and bacteria. Thanks to their use, you can get immaculate water. The properties of UV lamps for water make them applicable wherever necessary to use a clean liquid. The combination of a lamp with an ozone generator results in a system that does not require chemicals to maintain clean water in the SPA.

For bathtubs and SPA pools used for public use, there is an option to connect a water treatment station with a sand filter. Several types of devices included—compact stations for dosing PH and CHLORINE, PH, and H2O2. The active oxygen system is used for people who are allergic to chlorine. There are professional stations for dosing PH, CHLORINE, ANTIGLON, and FLOCULANT. The probes are installed in an isolated chamber. There is a built-in filter in front of the chamber that purifies the water before it flows into the probes, protecting them from damage. Treatment stations are fully automated. After calibration, the station itself controls, tests, and doses chemicals to spa bathtubs and pools.
ADDITIONAL OPTIONS:

*Double insulation: €1,500

*Thermal cover for the entire pool: €1,200

* UV lamp: €500 (for a swim spa, it is best to install two UV lamps – one for the spa area and one for the pool)

* Lifter/Stand for the thermal cover: €300 (for swim spas, two lifts are recommended)

* Handrail for easy access to the pool: €180

* Balboa Touch ST3 panel: €500

* Balboa Wi-Fi module: €500

---