AVENTO 18328 Swim Spa with Counter-flow

Description

PRODUCT SPECIFICATION:

External dimensions: 590 x 220 x 148/158 cm

Number of seats: 6 people

Coating: Aristech USA Acrylic

Power supply: 380 ~ 400V/50Hz

Stainless steel construction: yes

HYDROMASSAGE SPA ZONE:

Temperature range: 15°C ~ 40°C

Number of seats: 6 people (including 1 lying down)

Number of pumps: 5 pcs in total

Total power: approx. 8.5 kW in total

Water pump 2HP/1.5kW: 3 pcs.

Circulating water pump 0.35HP/0.25kW: 1 pc.

Water jets: 69 pcs. including:

– water jets (2.2″): 2 pcs. (directional – for shoulder massage)

– Water nozzles (2.5″): 38 pcs. (including 23 rotating)

– Water nozzles (3.5″): 21 pcs. (including 12 rotating)

– Water nozzles (5″): 8 pcs. (including 3 rotating)

Air pump 0.9HP/0.7kW: 1 pc.

Air nozzles (1.5″): 12 pcs.

3kW water heater: 1 pc. (Balboa)

SPA light: 1pcs (seven kinds of colours)

Fibre optics: 26 pcs (seven types of colours)

Waterfall (illuminated): 1pcs (seven kinds of colours)

Ozone generator: yes

Aeration valves: 3 pcs (Easy-Flow Air Venturi)

Waterfall regulating valve: yes

Valve for adjusting arm massage jets: yes

Suction valves: yes

Intake valves: yes

Recessed nozzles flush with acrylic: yes

Nozzles made of stainless steel: yes

Aromatherapy: yes

Cartridge filter: 1 pc.

Headrests: 3 pcs 

Control panel: Balboa TP-600 or VL-801D

POOL WITH COUNTERFLOW and  SPA:

Temperature range: 15°C ~ 40°C

Number of pumps: 5 pcs in total

Total power: approx. 12 kW in total

Water pump 3HP/2.25kW: 3 pcs.

Water pump 2HP/1.5kW: 1 pc.

Circulation water pump 1HP/0.75kW: 1 pc.

Water jets: 6 pcs in total

Water jets with counterflow (9.5″): 3 pcs.

3kW water heater: 1 pc. (Balboa)

SPA light: 2 pcs (seven kinds of colors)

Fiber optics: 54 pcs (seven types of colors)

Water poles (illuminated): 8 pcs (seven kinds of colors)

Handle (stainless steel): 1 pc.

Ozone generator: yes

Aeration valves: 4 pcs (Easy-Flow Air Venturi)

Valves for regulating water columns: yes

Suction valves: yes

Intake valves: yes

Recessed nozzles flush with acrylic: yes

Nozzles made of stainless steel: yes

Aromatherapy: yes

Cartridge filter: 2 pcs.

Control panel: Balboa TP-600 or VL-801D

ADDITIONAL OPTIONS:

*Full insulation: €1,500

*Acrylic color + housing: €1,900

*Thermal cover for the entire pool: €1,200

* UV lamp: €500 (for a swim spa, it is best to install two UV lamps – one for the spa area and one for the pool)
* Lifter/Stand for the thermal cover: €300 (for swim spas, two lifts are recommended)
* Handrail for easy access to the pool: €180
* Balboa Touch ST3 panel: 500, –
* Balboa Wi-Fi module: 500, –

---

 

All pool basins are made of high-quality American acrylic, resistant to weather conditions and UV rays. The construction of the pools is made of chrome-nickel stainless steel. The basins and casings are available in many colors. The customer can individually order the colors. The controllers carry out daily filtration and maintain the set temperature. The equipment includes cartridge filters and an ozone generator for water disinfection. It is also possible to install a UV lamp and a sand filter.

The pools are adapted for use both inside and outside, in summer and winter. Thanks to the thermal coating and full insulation of the bottom of the basin and the casing, the water’s heat is kept at the same level for a longer period of time. Also, the costs of electricity consumption are minimized. Illuminated handrails or water poles add color to the entire device.

The advantages of such pools include quick assembly and implementation time. The most popular models are available immediately, and there is no need to wait for their production. To install such a pool, an even, hardened surface and two power cables are enough. It does not require prior planning. You only need a sufficient amount of space to put it in the garden. The pools have different lengths, which gives a lot of room for maneuver; they are located in small gardens.
Each tub and garden pool and pool in our offer have a basin made of high-quality US acrylic. The coating of the bathtubs is 100% acrylic without any additives, which will prevent it from tarnishing even after 10 years and is very resistant to any scratches. The thickness of acrylic in our bathtubs is even several times greater than other bathtubs’ coatings on the market. The color of the acrylic, just like the housing, can be selected from the color chart. The jets are embedded in acrylic thanks to this application. When lying in the bathtub, you do not lie on the jets (as is the case with most of this type of bathtubs) but on the acrylic. They will not hurt the body during hydromassage, which results in 100% satisfaction with the bath.
The structure is made of stainless steel. The entire bathtub or pool is based on a stable stainless steel frame, thanks to which the bathtub has a strong and durable support base, which is very important for larger bathtubs. The weight of such SPAs from 250 kg to even 1500 kg in swimming pools, also including the weight of water and people, a relatively large weight is obtained, which requires solid support, which is why a good design of the bathtub is so crucial.
The BALBOA panel supports all functions in the bathtub and the pool, starting the pumps, ozonation, lighting, and ending with the heater. A company from the USA produces the highest quality parts for SPA bathtubs, including a completely failure-free and vandal-proof controller. The controller has two independent water heating modes, i.e., so you can easily manipulate the water temperature depending on your needs. After programming the appropriate filtration cycle, it starts the circulation pump, which passes water through the filters and disinfects it.

The BALBOA controller can be expanded with a wifi module, which will allow you to control the bath using an application on your phone.

Our bathtubs and swimming pools are equipped with a 3000 W instantaneous water heater. Thanks to it, you can raise the temperature of the water and keep it at a constant high level. The heater is an indispensable device when using the SPA.
The jets in the bathtub and the pool are chrome-plated. You do not have to worry that these jets will become covered with limescale. Each water jet has an aeration function, which consists of adding air to the water system, which increases the strength of the water massage.

Most of the water jets can be turned off, which allows you to freely manipulate which parts of the body to massage and with what force. The jets found in SPA tubs are rotating, directional, and point-like.
The complete insulation of SPA bathtubs is made of polyurethane foam, the entire basin of the bathtub is covered with a thickness of about 15mm to 30mm, the casing and the bottom are about 10mm to 15mm, this prevents heat loss, thanks to which the power consumption of the heater is limited.

The housing is made of high-quality, weather-resistant plastic. Sunlight does not discolor the color of the housing. We have a different range of colors that can be select from the available template.

The bottom is made of polymer and has been completely cast. On the other hand, the board is designed to provide insulation from the ground, moisture, and weather conditions. The bottom, casing, and full insulation create something like a thermos flask. Heat transfer lasts a very long time, which results in low electricity consumption.

Insulation standards for external bathtubs:

The polyurethane foam basin insulation has a thickness of approximately 15 to 30 mm.

The casing frame is made of wood, and the casing itself is made of high-quality plastic (insulation thickness on the casing elements is 30mm). The entire housing with the bottom is insulated with polyurethane foam with a thickness of about 10-15 mm.

Pumps and heater give heat to the bathtub and reduce the amount of heat given off by the basin, which reduces electricity consumption.

Insulating the bottom of the bathtub with polyurethane foam is more efficient and gives less heat to the atmosphere than foam with a thermal insulation foil available from competitors. Foam with a thermal insulation foil will not fill all the gaps, as in the case of polyurethane foam, which will tightly fill every free space, thanks to which the heat of the water does not escape from the basin.
Two ball valves are installed next to the circulating pump and the heater, which in case of failure of a given part, can be turned off and replaced without the need to drain the water from the bathtub. Manifolds and pumps have additional pipes that are connected to the drain. When draining the water from the bathtub, the water leaves all pipes by gravity and the pumps without blowing out and disassembling the pumps.
We offer fiber optic bundles and underwater lighting in 7 different colors in our tubs and pools. In terms of quality, optical fibers are definitely better than LED light. They are completely failure-free and shine with brighter light. These lights are the perfect solution for an amazing experience and create the right atmosphere while bathing. Our lighting changes colors smoothly. It is possible to retain any color, giving even more pleasure from hydromassage and swimming—color types: red, blue, yellow, green, orange, purple, and white.

Color therapy is an unconventional treatment method that exposes the sense of sight of a given person to the appropriate colors that soothe, relax or stimulate.
The ozone generator is a special program that sterilizes the water so that both the bathtub /swimming pool and the water will be clean. It is a new and fast way to remove bacteria, algae, etc., the water does not need to be changed even up to 6 months.

It is possible to install a UV lamp for water treatment in SPA bathtubs and swimming pools. As sterilizers, they remove harmful substances from the liquid and eliminate viruses and bacteria. Thanks to their use, you can get spotless water. The properties of UV lamps for water make them applicable wherever necessary to use a clean liquid. The combination of a lamp with an ozone generator results in a system that does not require chemicals to maintain clean water in the SPA.

For bathtubs and SPA pools used for public use, there is an option to connect a water treatment station with a sand filter. Several types of devices included—compact stations for dosing PH and CHLORINE, PH, and H2O2. The active oxygen system is used for people who are allergic to chlorine. There are professional stations for dosing PH, CHLORINE, ANTIGLON, and FLOCULANT. The probes are installed in an isolated chamber. There is a built-in filter in front of the chamber, which purifies the water before it flows into the probes, protecting them from damage. Treatment stations are fully automated. After calibration, the station itself controls, tests, and doses chemicals to spa baths and pools.

---